| Greenseal Injection Grout |
Seal cracks, honey combs in concrete.
High strength grout due to its non shrink
property when grouted in pores.
Crystallize inside the capillaries thus
making the concrete waterproof.
Good bonding chemically and physically
cracks
|
| Greenseal Flash set |
Sets within 1 minute.
It instantly and effectively stops water
seepage and leakage.
Improves compressive strength, bond
strength and tensile strength.
Withstands critical thermo cycles.
Prevents rust, water borne contaminants
and unsightly vegetation like moss and
lichen.
Cost effective as it eliminates periodical
maintenance and reconstruction cost.
|
| Greenseal Polydek |
Prevents further ingression of water in old and new concrete.
Allow vapour transmission to release moisture.
Enforced with fibre glass matt increases film tensile strength and wear resistance.
Polymeric characteristics enable bridging of hairline cracks and accommodate minor joint movements.
|
| Greenshield 108 |
Heat reflection thus saving energy and
electricity bills i.e. reduce air conditioner
usage and prevent global warming.
Able to absorb thermal shock and
vibration.
Excellent dirt pick-up resistance.
Aesthetically pleasing colour options.
Excellent elasticity, durable and able to
retain elasticity for many years.
|
| Greenseal Flexi 201 |
Excellent adhesion bonds to porous and nonporous surfaces.
Non-toxic and is approved for potable water
use.
Non-corrosive to steel and iron.
High resistance to carbon dioxide and chloride
ion diffusion.
|
| Greenseal Flexi 202 |
High Tensile Strength of 1.6N/m ㎡ .
Excellent adhesion bonds to porous and nonporous surfaces.
Non-toxic and is approved for potable water
use.
Non-corrosive to steel and iron.
High resistance to carbon dioxide and chloride
ion diffusion.
|
| Green Seal 5000 |
Permits nominal expansion and contraction
without losing bond to substrate.
Durable and remains elastic at extreme
temperatures.
Effective water and vapour proofing system.
Chemically impervious barrier resistant to
acids, alkalis and salts and not susceptible to
bacteria attack.
Able to rehabilitate cracked surfaces by sealing
cracks up to 2mm wide.
|
| Multiseal 2000 |
Increase concrete hardness and strength up to
35% and surface will not be worn down by
heavy traffic, abrasion and thermal stress.
Seals Hair-line cracks up to 1mm by injection
of Calcium Acetate.
Reseals shrinkage cracks as they form with
time in the presence of water.
Low consumption rate per area of application.
Eliminates surface problems like surface
scaling, cracking, efflorescence .
|
| Greenseal Polyurea |
Extremely fast reactively and cure with
no catalysts.
Seamless and joint less coating and lining,
maintains flexibility.
100% solids, no solvents, VOC-free, no
odor, UV resistant.
Resistant to most chemicals, solvents,
acids and caustics.
Excellent corrosion protection, low
permeability, saltwater resistant, good
outdoor weathering.
Thermal stability, low temperature
flexibility, takes high radiant heat.
|
| Greenseal PVC Waterstops |
Greenseal Waterstops are designed to allow for expansion, contraction and other movements that can cause joints to
open and close.
They are designed for use in water retaining and water excluding structures where a positive seal.
|
|
Greenseal bentonite waterstop
|
Withstands hydrostatic water head up to 70 metres.
Forms a positive seal, sealing cracks & small voids.
May use in potable water tanks. Non-toxic.
Can apply to irregular concrete surfaces. No
need to level.
Compressible and malleable allowing for good
contact in precast applications.
|
|
Greenseal Polysulphide Sealant
|
Adhesion to most construction surfaces.
UV, chemical and oil resistance.
Chemical resistant.
Durable elastomeric.
Retains flexibility even with concrete
movement.
Resists mild acids, alkalies and petroleum
products.
Accommodates high cyclic movement.
Contains no volatile solvents.
Fast curing.
|
|
Greenseal Reinjectable
|
Adaptable to any form of structure and work
cycle.
Permits re-injection if leakage persists or
reappears at a later date.
Prevent injection material from returning even
under back pressure.
Does not deteriorate even if exposed to such
injection materials as polyurethanes, vinyls
esters, epoxies and cements.
|
|
Greenseal 1217 PU
|
Has excellent resistance to chemicals.
Ressistance to water through hygroscopic
properties.
Non toxic once it cures.
|
|
Greenseal Everpol
|
Excellent waterproofing capabilities.
Able to withstand regular foot traffic.
Easily installed use flame torch methods.
Reinforced polyester allows the sheet to be
flexible, durable and resistant to heat , aging
and puncture.
|
|
Green seal ultramix
|
Fast application resulting in considerable
time savings.
Gives wear, abrasion and impact
resistance superior to concrete.
Slip-resistance finish can be obtained.
|
|
Greenseal Masonry Water Repellent (MWR40)
|
Good penetration depth.
There is no change in appearance of the
substrate; the treated surface does not become
glossy.
Tack free, durable finish.
No separation of binder.
No formation of harmful by-products.
|